This is a stereo headphone amplifier circuit of using LM4910 IC. This circuit is very simple so it is very easy to make even for beginners once. because the voltage source is used only 3 VDC you can use 2 x A3 battery in series stacking.
Circuit diagram of 3VDC Stereo Headphone
Amplifier by LM4910
 |
| IC LM4910 Pinout |
LM4910 Boomer belonging to the series of National Semiconductors is an integrated stereo amplifier is primarily intended for headphone stereo applications. The IC can be operated from 3.3V ans its 0.35mW can deliver output power into a 32 ohm load. The LM4910 has very low distortion (less than 1%) and the shutdown current is less than 1uA. This low shutdown current makes it Suitable for battery operated applications.
C1 and C2 are the input DC decoupling capacitors for the left and right input channels. R1 and R2 are the respective input resistors. R3 is the feed back resistor for left channel while R4 is the feed back resistor for the right channel. C3 is the power supply filter capacitor. The feedback resistors also sets the closed loop gain in conjunction with the corresponding input resistors.
